Keep Making

@DIYMaker_Johan Oh for sure, this is the more advanced mounting option. At the end of the day it's a mount < something with a mid thread hole aka a snap < a locking bolt. How do you feel I could simplify this more. Also how come you went with this mounting option?

.@KeepMakingOn the newer bolt lock mounting system is so confusing. I want to lock my panel with those, but I can't figure out what exactly to use to mount it. I kow of the single, dual and quads, that's not the issue. But just all things necessary to mount a tile to such "lock"

@DIYMaker_Johan I'm sure that will be fine too. You can always cut up the mdf into smaller bits.

@KeepMakingOn Thanks for the info! 😊 Not sure if I'm gonna do it this way. Unfortunately big MDF plates are too big. So still need to figure out how I'm actually gonna to it. Using planks, like I explained with that picture would be easier, but not sure if that will be fine.

.@multiboard_io @KeepMakingOn I've a question. Don't mind the ugly patched holes btw. 🤣 Do you think it will be fine to use wooden planks like the large orange "rectangle" to mount 8x8 panels? Instead of wall directly Those black X are square snaps Also dual and single. 1/2⬇️

My go to mounting technique is onto a sheet of 12mm mdf with 15mm screws. That way, you don't turn your wall to Swiss cheese, and it's up to you how load baring you want the system to be. As in you use more screws to mount the mdf for more weight. And if you want to move it in the future all you have to do is unscrew the mdf.

@KeepMakingOn Also, what about load bearing? I mean if I would strap a big MDF plate to the wall with bigger screws and use more smaller screws to mount the boards via snaps to that board, do you know if that still can takes the same weight? Not planning for really heavy stuff though I think

@DIYMaker_Johan Honestly I've never tried it so I would not be 100% sure. I have mounted multiboard like this onto a cleat wall of mine and that turned out fine. Is there a reason not to just go with a sheet of MDF in the back. ?

So for example: 4 rows of 8x8's. Then only planks at top/bottom and in between wete horizontal panels meet. (Orange in picture) Those plans with longer screws on wall and then panels with snaps on those planks with shorter screws. Also vertical planks needed? 🤔 2/2

Ya... the Frank truth is all PLAs are different. It just happens that the matte PLAs are "weaker" but more maluable. Thus, they have more shatter resistance and thus come across as strong for a building system. BUT every brand is diffrent and some add chalk to make pla matte which makes it way worse!

I always thought that matte PLA was less strong that normal PLA, but @KeepMakingOn from @multiboard_io says on his website that matte PLA is stronger then regular PLA. On reddit I also see different opinions, but most say that it's weaker then regular PLA. Confusing. 🙃🤣😅

@jerrari3D Hey Joey, It's Jonathan the guy who made Multibaord, I would love to have a chat with ya but I can't seem to find anyway to get in touch. Would be awesome if you could send me a message to Hello@keep-making.com

What an incredible week at #Formnext! 🚀 Huge thanks to everyone who visited our booth. Relive the action in this video—tagging some amazing folks: @PendergastBen @Plastic3D1 @Chappel_A @mantisrobot @FilamentStories @Stemfie3D @joeltelling #bambulab

🚀 At our #Formnext booth, we’re thrilled to present a special showcase with our friend Jonathan K.@KeepMakingOn 🔥 Multiboard Wall • Size: W10m x H3.5m • Built with 900 tiles & 1400 connectors • Printed in 5 days using 20 printers! 👉 Learn more at share.bambulab.com/multiboard Swing by our booth to see it in person! Hall 12.1, Booth D01! #3DPrinting #bambulab

See what’s bringing so many friends together at #Formnext2024 @PendergastBen @Plastic3D1 @Chappel_A @mantisrobot @KeepMakingOn @FilamentStories #bambulab Hall 12.1, Booth D01! #3DPrinting

And that’s a wrap on #Formnext 2024! A huge thank you to everyone who stopped by our booth. Your support, enthusiasm, and love for 3D printing mean the world to us:-) We’re already excited to see you again next year. Until then, keep creating, keep innovating, and stay awesome. See you in 2025! 👋✨ #bambulab

Hey,Today (Wednesday 4th) I'll be hosting a LIVE Q&A on YouTube from 6pm to 8pm London time BST. Bring your biggest Multiboard questions and roadblocks, and learn more about the Multiboard ecosystem. You can start submitting your questions in advance in ⁠the “Live Stream Chat” in the Multiboard Community: community.multiboard.io/c/live-stream-… Here’s the link to join the live Stream: youtube.com/live/EJYrJs9NC… See you there and Keep Making! 📷

@P4LSEC Amazing stuff! Can't wait to see it ramped up with the latest massive update.

Here’s my 100% 3D printed toolbox. It holds most of my smaller regular use stuff around the house. It uses the Multiboard system made by @KeepMakingOn. Way better than gridfinity and hexwall imo. Can’t wait for the big Multiboard update coming soon!

.@KeepMakingOn I assume the 8mm off the wall mounting snaps Stacks, like in the picture, also need ironing on all top surfaces? I mean like the tile stacks.

@piotrkrzyzek Hey, I'm seeing you all over the discord server and I see you have put in quite a get points and requests. I'm wondering if you would be free for a quick chat just to touch base, say Hi and get some feedback at some point. Feel free to send me a DM on discord

@kesselborn First launch of Multiboard was 100% made using just blender precision modelling. Now it's rapid prototyping in blender precision modelling and then finished off in Fusion to then be mass exported in blender. I do this workflow mainly for the makers that request .step files. =)

@KeepMakingOn out of curiosity: do you create the multiboard stuff with CAD-Sketcher and/or Blender precision modeling?

Welp, I guess I'm leaving the lights on tonight!

@djlettau @Thangs3D would you mind lending a hand here 😁

@KeepMakingOn When I go to thangs.com and log in and select my keep making membership it says The membership is broken do not select it! I can't change or stop my membership. Any help would be appreciated.

@MakeAnything3D @BambulabGlobal Welcome to the darkside 😅

I've finally tried a @BambulabGlobal printer! I was impressed... and humbled 😅 . Check out my first impressions video: youtu.be/xPCKnkucUg0

Hey I'll be LIVE on "The Infill Podcast" 🎙️ @TheNextLayer this Thursday, 22nd at 10 AM GMT! We'll explore my maker journey, the origin of Multiboard, and maybe some future sneak peeks. Tune in: youtube.com/watch?v=i8brDE… #KeepMaking