makeo

I further improved the compatibility with different LAN adapters of the USB Dolphin. Now you will be able to use the Wii LAN Adapter: #compatible-usb-ethernet-adapters" target="_blank" rel="nofollow noopener">github.com/makeo/usb-dolp…

@fyredragon69 This would be cool, but the issue is that no game/homebrew looks for a keyboard attached to SP1 or Slot A/B. For homebrew, it would not be that hard to add. For games, it's theoretically fixable by patching the game, but not really sensible and unlikely to happen.

@makeo_dev are there any plans to make usb keyboards usable with this? would be great so people don't have to buy expensive usb adapters for the controller ports, or worse the pso controller keyboard

📢 I can finally show what's coming next - USB Dolphin - a USB 2.0 port for SP1 or Slot A/B. Supports all kinds of USB storage devices, the SP1 variant even allows network game streaming (Swiss + RetroNAS/FSP) and more! See all its features here: store.makstech.io/usb-dolphin

@0bieone The speed is limited by the connection to the GC - performance is on par with an SD2SP2 2.0. The port on the device is high-speed (USB 2), not full-speed.

@makeo_dev dope, how the speed?

📢 The design and production files for the solderless PicoLoader modules I'm selling are now open source: #solderless-module-specification" target="_blank" rel="nofollow noopener">github.com/makeo/PicoLoad… Shout-out to Silversteel for the design and a thank you to all of you who already supported me by ordering through my shop!

📢 I added quite a few new toys to the store! This includes USB Gecko's, PicoLoaders for the Panasonic Q and a variety of SD Adapters. For US customers, prices include tariffs. store.makstech.io

@nachosonic There is a config option to force progressive

@makeo_dev idk much about this, but is this menu 480i only?

📢 cubiboot v0.3 is out! - Game icons now load very quickly as long as you use an exFat formatted SD card - Improved SD card compatibility - And a few other bufixes Download it here: github.com/makeo/cubiboot…

@DatZigZagKid You can get the solder flex cheaply directly from JLCPCB (ordering guide is on the PicoLoader github). Alternatively, you can get full solderless or soldered kits from my store.

@makeo_dev Is the original picoloader flex cable still available for purchase? The solder one. Thanks!

Is this even a GameCube anymore?

My new favorite cup!

@tonyt3rry x shaped box is my logic analyser and the board at the bottom a debugger

@makeo_dev What are the x shaped box and the board at the bottom , ode and debugging?

@nachosonic custom logos are currently not supported. This will likely be addressed at a later date.

@makeo_dev I've just installed it, but I lost the custom logo at start... there's a way to keep the cubeboot custom logo?

Cubiboot is here! This gives you the cubeboot interface for PicoLoader and PicoBoot! It has most of the features of cubeboot but supports SD2SP2, SD Gecko and similar SD adapters. Check it out here: github.com/makeo/cubiboot

@bobrocks951 Yes - cubiboot launches all game iso's using swiss and for the disk drive you can choose this via the config.ini

@makeo_dev Awesome! It's a very slick interface. I've always wondered though, can titles in here be booted with Swiss enhancements as well?

@Cort_X09 It will likely work with most mods but I will only support PicoLoader and PicoBoot.

@makeo_dev Does that interface is a picoboot exclusive or could be used as a launcher on other ODEs, there are many devices these days and that interface looks awesome

The solderless PicoLoader modules with replaceable flex cables are available to US customers! store.makstech.io/products/picol… And as a small treat (or trick), a teaser of something that is coming to PicoLoader and PicoBoot very soon!

@razielleonhart The flex cables I sell are different from those sold elsewhere and only compatible with the modules I sell (mine are replaceable without soldering). But you can buy normal replacement flex cables from laserbear.

@makeo_dev I bought a kit with the flex cable elsewhere and my meat fingers broke it. So I just need a flex cable. And your site was the only one to sell a stand alone flex cable.

@FL_Slayer Yes you can still buy them worldwide. They just weren't available to US customers until now because of the tariff situation.

@makeo_dev does this ship to canada?

@razielleonhart I will enable this within the next few days. Remember that the kit already has 2 flexes included tho.

@makeo_dev I can't place an order for the stand alone flex cable when I switch the store to US.

@0bieone Yes!

@makeo_dev i can order this now, US here?