zoe

@p1nepalm 100

sb from discord!

new husky design 🐾

@DarkAdapted @alanthefisher @FalconryFinance If you think a phone camera with a filter can be useful for IR seeking, you really don't understand these technologies. Thermal infrared is still significantly longer wavelength than the near infrared that can be captured by RGB cameras with a filter.

The camera on a cell phone would likely serve perfectly well for a daylight visual-tracking system, and something like a cell phone CPU is overkill for running a program to track a target in the camera and compute a proportional navigation intercept course. The early Sidewinders did this with some vacuum tubes. If you could get a similar camera in IR, or just filter the cell phone camera to IR, now you have an imaging infrared seeker like the AIM-9X. Now the guidance system is chasing a shape, not just an IR point source. Put one camera in the seeker, mount another one on the launcher with magnified optics and based on tilt angle and image size you should be able to tell the seeker altitude, distance and bearing of the target, along with an expectation as to when the missile camera should be seeing the target. I am actually kind of surprised no one has done this yet.

this is how we make domestic and international Air travel a thing of the past made his own MANPAD system it looks like

@FanlessTech used to have a EVGA GS 650, made by seasonic. lasted 9 years but then very suddenly died during usage.

Over the years our Seasonic fanless PSUs boast a 100% reliability record. Not a single unit has ever failed.

@Prof_Cabbage @straypuppygf 40!

@straypuppygf 20!!

puppy girl adopt..!!

Come see us at our booth :)

@i2cjak @blind_via had to use 0 ohm single layer a while ago for an aluminum PCB, which are restricted to single layer by their very nature

@blind_via Idk if that’s actually a worry. Also please for the love of God just use a 4 layer board. 0 ohm single layer is so incredibly boomer

I recommend not routing traces between pads of your ICs or discrete. Too much of a shorting risk from the solder joint of the pin. It is pretty common on low cost electronics though, but I'm a reliability dude first. That said, there is an entire practice of 0 ohm jumpers being used on single layer board designs.

@roguespider07 @SmolAltNoko it's not even made by Nintendo

Promo images showing people using their phones and stuff to justify the usefulness but I'd love to hear how this feels from someone who's disabled and might use this as an option for accessibility

@ptrschmdtnlsn @softminus So not a 2000x wear increase but some unknown lower factor.

@ptrschmdtnlsn @softminus I would assume so, but it's probably a "up to 50 Cycles are negligible in terms of PE durability, after that it kinda starts to matter and we don't wanna make guarantees about it". Not a "after 50 Cycles this thing might start to fail".

found out that some SPI flash chips have a FACTORY MODE (presumably to make your production line run faster) which makes it write quicker at the cost of eating through cycle lifespan like crazy, incredible

@ptrschmdtnlsn @softminus Not really - if you look at the footnotes below, it's more of a "50 Cycles or we don't guarantee the 100k Cycles for normal mode anymore", not a "50 Cycles and this thing might fail"(which is what the 100k Cycles means).

@softminus Wait, that's so cool. Also, that's crazy, not even a 2x speed win, in exchange for consuming PE cycles at 2000x the rate.

@i2cjak it's a bash feature, not mkdir

how the fuck did i not know about this w/ mkdir...?

@AhogeRespecter eh, official translations have always been localizing a lot of cultural context. not translating those things is mainly a fansub thing.

Back when I got into anime there were several words you were expected to learn over time to understand some anime because they just wouldn't be translated. Things like honorifics or dere types or moe. Stopping this practice and has been a huge mistake

@cowardlycoline @angelb0yfriend REFLEM, it's a Japanese brand

@angelb0yfriend WHAT is that hoodie OH MY GOD PLAESE WHAT BRAND IS IT

Local genderfucky tboy thing

@i2cjak wouldn't rly call nucleo boards an eval kit tho, that's more what the discovery line is for and also I think a lot of those are to allow them to use the same PCB with different MCU variants

0 ohm resistors on an eval kit are an antipattern

@_Stocko_ @rotvevo how? this isn't some stuff you can use an open source github library for or program it according to some tutorial, you need to have a team of phd-level experts doing your software to make it competitive.

@rotvevo it does if you're a software developer

this should cost $18. it's all software

@FollowAllGirlss hiiiii

Chances are, if you're seeing this, you're trans! Say hi!

@venipher followed u bc of the less-than-human post >///<

how the fuck am I 500 followers

sitting on the ground next to my gf while she is gaming and getting occasional headpats from her is actual peak

@BeryAngryPuppy good morning :3

@Twright4444 @brooke2valley menopause symptoms

@brooke2valley What happens if you forget

Putting it off till 1am is normal, right? .-.