Thomas Jensen | @[email protected]

I don't post here much, you can find me on: - Bluesky: thomasjsn.bsky.social - Mastodon: @thomasjsn@fosstodon.org There is also a feed available for the blog: blog.cavelab.dev/feed/

The resurrection of my file server is complete 🍻 blog.cavelab.dev/2025/01/zeta-i… #homelab #zfs #fileserver

Blog post about the RRCP (Realtek Remote Control Protocol) broadcasted frames that caused 1 drop/s. blog.cavelab.dev/2025/01/netdat…

The mystery seems to be solved — actually it was two things: the lack of VLAN egress filtering, as suspected. But the main culprit was RRCP broadcasts from my TL-SG108PE switch, or "Loop Prevention" as they call it. Disabled that and the 1 drops/s went away 🥳

So, @netdatahq looks nice. I've been without a monitoring solution for a while now — didn't want to spend time setting one up. Currently doing some tests with a parent node streaming to their cloud. Excited to see that their "Anomaly advisor" will find. #homelab

Only took about a year to get the blog post published. Better late than never. Here is my @GoHugoIO #BunnyStream implementation 🤠 blog.cavelab.dev/2025/01/bunny-…

I have tried @BunnyCDN Streams before, when it was in preview. It seems more polished now 🙂 I wrote about my previous video solution a few years ago. blog.cavelab.dev/2021/06/video-…

I discovered last week that some of the videos on my blog didn't work, froze on my phone, and random CORS errors 🤷‍♂️ Down the rabbit-hole I went — looking for a video service, YouTube and Vimeo is out. I mainly looked at @MuxHQ and @BunnyCDN Stream.

The #fiber between the house and garage is finally operational 🥳 #homelab #networking blog.cavelab.dev/2025/01/fiber-…

LC keystone jacks and OS2 patch cord have been ordered 😎

60 meter 6-strand single mode #fiber and SFP modules from @Ubiquiti. Going to pull the fiber in a buried conduit to the garage. @mikrotik_com CRS317-1G-16S+ in the #homelab and D-Link DGS-1210-10P in the garage. #networking

Using a #Shelly Plus Plug S to monitor the #homelab power — I got much better results using an #MQTT sensor than the integration in #HomeAssistant 🔌 blog.cavelab.dev/2025/01/shelly…

@dreamsindrums @GoHugoIO Thank you 🙂 I've (somehow) managed to get the writing productivity back up.

@thomasjsn @GoHugoIO you are on a roll!

I've added navigation buttons to my @GoHugoIO series taxonomy, making it much easier to navigate ⏮️⏭️ blog.cavelab.dev/2025/01/hugo-n…

Sometimes I do non-computer related projects — like turning an old oak tabletop, from my friend's barn, into a pub table. blog.cavelab.dev/2025/01/pub-ta…

My #homelab page is now up to the with all the recent changes 🖥️ blog.cavelab.dev/homelab/

The computer page for the new #homelab #server is published 🤓 blog.cavelab.dev/computers/beta/

I solved my #wireguard problem — slow egress through my #mikrotik #chr. I was "working" with the @KagiHQ Assistant while troubleshooting. My first time using an AI assistant, I am fairly impressed 🙂 blog.cavelab.dev/2025/01/optimi…

Underground conduits from the house to garage, and garage and shed. Power and #fiber 🤘 blog.cavelab.dev/2025/01/underg…

20 years of #homelab ♥️ blog.cavelab.dev/2024/12/homela…

Troubleshooting low throughput on @mikrotik_com CHR in my #homelab — I made an interesting discovery about interface queues, that had a big impact. blog.cavelab.dev/2024/12/mikrot…

I have a few projects ongoing in the #homelab this winter. blog.cavelab.dev/2024/12/homela…

@Raspberry_Pi @home_assistant @dakboard Only took close to two years to get the blog pots published 🤷‍♂️ blog.cavelab.dev/2024/11/rpi-ou…

I'm using an old @Raspberry_Pi 2 and a DS18B20 probe to accurately measure outdoor temperature. Value is sent on #mqtt to @home_assistant, and displayed on our @dakboard digital calendar 👍

Using @home_assistant; I'm setting the clock on our #Komfovent #ventilation system once a week — to prevent it from drifting. blog.cavelab.dev/2024/11/set-ko…

Upgrading the #Proxmox server hosting my #mikrotik #CHR router. I first downloaded the updates, before taking the VM down. blog.cavelab.dev/2024/11/upgrad…

I’ve been using my HP ZBook 15 G5 #laptop a lot lately, but it annoyed me that I couldn’t tap the touchpad in i3. But fixing/enabling it was a breeze 🙂 blog.cavelab.dev/2024/11/laptop…