Consoles Unleashed
3.2K posts

Consoles Unleashed
@ConsoleMods
Original mod kit designer. Mod shop since 2018. Mod kits, parts, guides & tech info. Install service will be back. #ConsoleModding #ConsoleMods #RetroGaming











Super Nintendo 2chip mod and refurb - Super CIC / uIGR / D4 Region Patch from @ConsoleMods - full recap - New 78S05 voltage regulator and C81 cap upgrade for vertical bar elimination - new fast blow fuse #Nintendo #retro #gaming

Sega Mega Drive Switchless Region, In-Game-Reset & Dual Frequency Oscillator Mod Kit @ConsoleMods

Following a checklist from ConsolesUnleashed, I finally traced the fault to a broken trace between PIN 7 of IC9 and JP10. The customer must have accidentally cut it while doing the JP10 cut, and I didn't see it. I restored the trace and the console started to work as intended








Sega Saturn model 1 - Region Free 50/60Hz & In game reset mod from @ConsoleMods - Main board and PSU capacitor replacement #sega #retro #retrogaming


- Sega Mega Drive Switchless Region & In-Game-Reset Mod Kit from @ConsoleMods - Capacitor replaced - New 2x 7805 voltage regulators #sega #retro #retrogaming



The full suite of Sega Master System 2 mod kits from @ConsoleMods installed in this one console. *Switch-less Region Change *RGB bypass *Controller Pause *2nd Bios support *FM Sound module & adapter *'RGB Encoder' & DFO. 👀 #PALGamers #mastersystem #madness



Sega Mega Drive 2 refurb and mod - Region free/In-game reset from @ConsoleMods - Full capacitor replacement kit from Console 5 - AV socket and power jack cleaned from oxidation. Ready for many more years of play 😎 #sega #retro #retrogaming




Someone reviewed my no wire SEGA 32X region mod & said they had to cut it to fit. It was unnecessary. As can be seen in these photos, the 32X motherboard does not sit flat against the cart adapter screw blocks. There is a gap larger than 0.8mm in which my mod sits with no stress.

Someone reviewed my no wire SEGA 32X region mod & said they had to cut it to fit. It was unnecessary. As can be seen in these photos, the 32X motherboard does not sit flat against the cart adapter screw blocks. There is a gap larger than 0.8mm in which my mod sits with no stress.







