Graham Mark

Catch up of some recent jobs, are you even a proper gas engineer unless your phone is full of work photos.....

Anyone know where you can buy spare wheels and spring sets?

@james_m69 @LBCplumbing To talk, yes, not back to site untill after I've hopefully got some pearls of wisdom. Thankfully second boiler on site.

@LBCplumbing @grahammark1978 You free tomorrow to do?

Anyone had an F13 "short circuit cylinder sensor" on a Vaillant system boiler before. It is a 100kw ecotec but fault codes are fault codes. NTC's all correct. No cylinder sensor installed. New PCB fitted. Vaillant engineer never seen it.

@DpawsonGas Harness looks ok, but next step was going to be new NTC all round and harness.

@grahammark1978 Wire rubbed through anywhere?

@PaulRHull @forduk @CarlYeomanson @GasSafePete @SmailesBen @CosyWarmPlumber @Damon_BPHR @proelectrician @BBC_TopGear @lloydlwlheating @CHAPSHeating @FordTrcks 24 Reg, guzzles oil, ford state 1 litre per 1000km is normal. 621 per litre, shocking.

Anybody else bought a new @forduk transit custom van and having a major problems only after 850 miles ?? Are there any manufacturers out there that actually care about Trade persons anymore? #ford #Transit #Fordcustom

Check out Grundfos Magna 1, 40-80 F, 220mm. Removed from working heating system. ebay.co.uk/itm/1464555604… #eBay via @eBay_UK

@lucabrojban Nope, and didn't look to hard either.

@grahammark1978 I hope you haven’t touched 😂😂😂🤦‍♂️

If you think I'm touching those valves you're mistaken.

@lucabrojban 🤔🤔🤔

@grahammark1978 Go on mate they built to last😍

Check out Grundfos Magna 1, 40-80 F, 220mm. Removed from working heating system. ebay.co.uk/itm/1464555604… #eBay via @eBay_UK

Check out Grundfos Magna 1, 40-80 F, 220mm. Removed from working heating system. ebay.co.uk/itm/1464555604… #eBay via @eBay_UK

Check out Fan for Remeha quinta 65, 85, 90. S101726. Box Open but never installed/used. ebay.co.uk/itm/1463981759… #eBay via @eBay_UK

Anyone looking for a Remeha Quinta 65,85,90kw fan, get in touch. S101726.

Charging methods have improved so much in recent times.....

Press is easy Yes, but think about future maintenance, use a compression fitting.

Ecotec +100kw. 24v switch. New pcb fitted, ntc's all correct, wiring harness good. No hw sensor fitted. Ideas?

Spot the issue? Hint, there is no balanced cold feed.

Apparently their system was cleaned 2 years ago......

Nope, not touching it, not even looking to hard. Bolts are bent already.