Celes

@iamcs2kitchen hello you use autoexec, if you use it you can leave a link. Thank you!

I think this is the biggest update they have shipped. Also this is not just third person animations. A lot of other stuff has changed too. I will take my time with this one. Expect a video in 2 days because I want to be sure about some things.

@stentweaks you can make an autoexec for cs2, if it's not too much trouble.

BEST Realtek Network Adapter Settings for Low Latency

@fREQUENCYCS you can do an autoexec if it's not too much trouble, please, what settings do you use.

@fREQUENCYCS on a msi x870e carbon wifi card with a ryzen7 9800x3d and rtx 5080 how much do you recommend pbo +100 or +200? if the optimization curve is optimizer-15 or -20?

matchmaking connoisseur

@fREQUENCYCS if you somehow see this, I think the whole community is waiting for an autoexec, if we are not asking too much, we would certainly all appreciate your effort. I hope you still see my message:D

You have to reconsider if you decide to spam on B site on Overpass , mirage or outside Nuke as CT. You must be very positive that you will get a kill or do damage because otherwise you lose the entire magazine

@fREQUENCYCS @FPSHEAVEN it means that I'm doing something wrong in the bios

@PPELEAA @FPSHEAVEN i always use the last and if i see any issues (which i never do in cs2), i revert one step back

@fREQUENCYCS @FPSHEAVEN from what you have tested so far, which do you think is the best driver for the 5xxx series

@PPELEAA @FPSHEAVEN this should not cross your mind. This measurement is in microseconds. 0 difference in your CS2's performance. Latencymon can spike due to things just happening in the background and also your driver being on normal power mode which is fine. dont worry

@fREQUENCYCS @FPSHEAVEN I changed the driver I had with 581.57, it's better than the one I had before, but it's much smaller than the one I had with the old driver, but if you can give me some advice on which is the best, I'd greatly appreciate it

@PPELEAA @FPSHEAVEN completely ignore that

@fREQUENCYCS @FPSHEAVEN it seems that there is also a problem with the nvidia driver for the rtx 5080, which version do you recommend?

Go to the PRIME95 tab and select SSE mode then set the FTT size to small and press save. Then go to general and set threads to 1 and the max iterations to something of your choice. You can do 16(total cores with SMT) * 10 or *20. So 160 or 320 for more time spent on the test. Copy the settings below and press Save. Then go back to prime95 tab and press RUN

@fREQUENCYCS @FPSHEAVEN is the test I did with prime95 ok?

@PPELEAA @FPSHEAVEN Curve optimiser lowers your CPUs operational voltage. You need to get your frametimes better if you want better input

@fREQUENCYCS @FPSHEAVEN I did the test exactly as you said, 12 hours is enough and I set 6 minutes for each core

@FPSHEAVEN @fREQUENCYCS short test

Start with plus 200 and -10 and verify that you are stable. Jump to -15 and validate stability again. You can repeat the process until you start having whea errors or crashes during the test. Then, lower the curve by 2 points or 5 and call it a day. Most chips can do -15 with ease.

@FPSHEAVEN @fREQUENCYCS I didn't get bluescreen or crash at +200 with -20 all core, is it ok like this or should I put -15? I really appreciate that you answered me, I didn't expect it