Phil @ Ember Prototypes

THE easiest way to calibrate your dual extruders, IDEX or tool changers 🔥 Universal, quick, easy 💪 emberprototypes.com/products/cxc #3dprinting #calibration #emberprototypes

@MasterCoe What the!? 🫨 never seen that before haha

@emberprototypes I'm running 6001P3-DC as a prefilter and using a 502 adapter to post filter with P100!

Safety first 😷 get yourself a respirator with the appropriate gas cartridges please k thnx 🙏

@Tellephasiant @VisionMiner @formlabs Yup I've used it. Crazy strong/stiff

@emberprototypes @VisionMiner @formlabs Need more fire tests! Have you printed with Rigid 10k? That might just be my favorite (albeit brittle) material to print with. SUPER SMOOTH AND SUPER ACCURATE!

@VisionMiner with the fire influence 😅 @formlabs flame retardant resin 🔥🔥🔥

@chris_r_v_s This is unfortunately a "production" kickstarter 3D printer 😅

@emberprototypes I hate doing it but sometimes getting hold of correct connector is near impossible for quick-idea-protos. Drive-locals don't stock a good range and waiting a week for something to come from an international warehouse where part is 50c on $10 shipping is silly.

I die a little inside when I see people using through hole connectors as inline connectors. Please no.

@CraftyFleur Test platform for my calibration tool 😅

@emberprototypes Clean setup! What's the build for? 🔥

Testing LED and probe control on the Pi and BTT Octopus. Both are working great 💪 Also if you thought V1 LEDs were bright, be prepared for V2 😂

@CraftyFleur Yup, terrrible

@emberprototypes That's like using wood screws where you need bolts. Just no! 😬

@VectorRoll @reprinted3D 💛💛💛

@reprinted3D I ordered mine when @emberprototypes tweeted that he stealthily opened the preorders. I couldn't wait to do so. It is a great tool to have for multi-toolhead printers. I have one early versions of the original as well.🤘😹

Go get 'em, gang!

@Adam_V3D Let me know how many you want and I'll send you an order!

@emberprototypes Still need to hit you up for pre-orders, I keep forgetting

Preorders opennnnnn 🥳 Thanks everyone who already bought one 🙏 will post more videos and content about it when I can 💛

@reprinted3D 💛💛💛

@geoag02 In this case it wasn't that the SOT23 pinout was wrong, it was that my circuit design needed an extra FET 🙃

@emberprototypes While I have certainly done my share of oops wires on prototypes, so far every time I have messed up an SOT23 pinout i have just transposed the two pins on the same side. For that I carefully bend the pins on the part to point the other way and install it upside down.

Fixing my mistakes 🫠🫠🫠

@StonedModder I was being crazy and just using side cutters here because my strippers were at home and I was too lazy to go get them 😂

@emberprototypes Nice work! How do you reliably strip wire that thin for soldering without it snapping ? I’ve given up and just take a lighter too it and scrape the rubber off the end 🤣

@billcreata I have a fair amount of experience hand soldering small SMT components so I just sent it lol

@emberprototypes Practice in some scrap first. Desoldering too. Switching components.

@3DInPhil No, just first samples 🙂

@emberprototypes oh no. was this a production batch?

Another day, another medical device prototype 💪 Printed in clear V5 on the @formlabs Form 4L #3dprinting #additivemanufacturing #resinprinting #formlabs #manufacturing

Insane how much work goes into building these.