Andrew Reynolds

@GribbleRC Hi Rob. We got the straight bars and half moon brackets to suit a D65 and put on our D145. It made a considerable difference as we could then put a bit of rubber 400mm wide on them as a paddle. Still not great but better than what ever we mounted on the original spiral.

Modifying the top auger to gain the misty & dissy heights of 15t/hr in 1.5t/ha direct heading #canola

@jackatgroundhog Hi Jack. Will you be making these to fit the 42mm tubes on the older bars as well?

We are excited to release our small seeds boot with moulded holes top and bottom for application of liquids including wetter. Our boot allows friction flow hose to be installed easily with no need for cable ties. These boots will be available for this season. Part 20B-6-GH32

@JamieNicolaou Thanks for the reply, always interesting to understand how people kill barley grass without killing the Ryegrass, not something we have to worry about in the wheatbelt where the rye is harder to kill 👍

@JamieNicolaou Hi Jamie. How did this brew end up? Did it have much effect on your ryegrass? I assume your Rye is improved/sown and not just naturally occurring/wild?

12 days post spraying with Imazamox over Kingbale Oats, Rye/clover for Barley Grass. Obvious yellowing of BG patches. Ryegrass looks happy. If this works it’ll be a game changer in controlling BG. Imazamox & Hasten, 120L/Ha water. Will be grazed once more and cut as silage.

@DrJewmelon @KondininGroup When do you expect the data/research report be published for this latest round of testing?

Pretty nifty nozzle cleaning station on the new Case IH 4450 Patriot. The next round of @KondininGroup SP sprayer testing kicks off.

@Voz_Dennis Yes please Dennis

Hi all, I do a short weekly update email on Australian and global grain markets, anyone interested? (free).

@Tedthekelpie @hirschirsch @cropmad @burgess_ag @CraigGorfin @venningj @nozzlesonline @GoldacresAust Electronics

@Agro_Andy @hirschirsch @cropmad @burgess_ag @CraigGorfin @venningj @nozzlesonline @GoldacresAust What don’t you like about PWM

New to me boom, running dual lines, Purple air inductions on primary line, yellow AIs on second line. I hate yellow nozzles and i hate AI nozzles. Rates 80-100lha. Anyone got low drift flat fans ? How would blue on primary and purple on secondary go in Low Drifts? @nozzlesonline

@hirschirsch @cropmad @burgess_ag @CraigGorfin @venningj @nozzlesonline @GoldacresAust Surely if it was that simple they would be all over it already? Would be a fantastic alternative to PWM Turn compensation which is about the only thing that would push us into an SP over the Tug along. A 10,000L tug along with non PWM Turn compensation would be my dream!

@cropmad @Agro_Andy @burgess_ag @CraigGorfin @venningj @nozzlesonline @GoldacresAust Should be no worries at all. Just via software and using existing controllers

@hirschirsch @burgess_ag @CraigGorfin @venningj @nozzlesonline @GoldacresAust If someone could work out Turn Compensation without the need for PWM at the nozzle, I would buy one tomorrow, extra points if it’s a tug along 👍😂

@burgess_ag @CraigGorfin @venningj @nozzlesonline Impressed with @GoldacresAust 3TS Pro with 3 lines of nozzles (=7 tiers). Don’t have to worry about your speed around headlands. Just wish Raven controller had software to do turn compensation too

@Rocket0764 @ipaddockapps iTechWorld JS80 3000Amp, even starts FWA tractors and Trucks provided they aren’t dead flat. Also have one as a battery pack in the car to run Engle when car turned off, gets 4-5hrs of life out of it when set at 2 degrees 👍

@ipaddockapps I’ve got a. Schumacher I think it’s called, never let me down Noco do a ripper🤙

Whats the best jump starter these days? This one was a miracle for years but seems to have given up

@CurtisGuthrie15 @FouldsCourtney Also couldn’t work this out, can’t log into the dashboard to cancel. After 6 months of sending Andrew emails (with no reply) asking them to stop direct debiting my card, I rang the bank and had to block the card (something to do with the direct debit set up AgriTrack use).

@FouldsCourtney Yeah havent been able to get a hold of anyone. Anyone know how to cancel the subscription? Cant seem to find it on the app. Cheers

Does anyone know what is happening with AgriTrack Live. Can’t get hold of Andrew Humphries via email, messenger or phone. Is AgriTrack still operating or is there a new App available that is going to be more reliable.

@mdfowler100 We have had ours for a couple of years now so unsure on $, worth the investment compared to wrecking a conventional Auger with Fert

@Agro_Andy What sort of $$?

Does anyone in WA make/sell/hire short conveyors for elevating fertiliser? We want to fill an Amazone linkage spreader with MoP from trucks but not super excited about using a grain auger (will damage both auger & fertiliser).

@LIamaOfDoom @GribbleRC @CaseIHAus @NewHollandAG It has air pressure sensors above and below top sieve to determine load on sieves. Shows as a bar next to loss/MOG/cracked Grain/tailings funnels. Can also put Left and Right pressure readings on run screen to see if header is loading up one side of the sieves 👍 great in canola

@Agro_Andy @GribbleRC @CaseIHAus @NewHollandAG Sieve pressure sensor? Is that air pressure (fan) or down pressure (load on sieve)? Interesting.

Those running @CaseIHAus or @NewHollandAG full automation, how do you rate it? #HarvestCommand #intellisense #intellicruise #FeedRateControl Question of interest as I’ve had heaps of calls about it. Seems to be a lack of understanding or training for it. Comments appreciated.

@HallRaelene Andrew Reynolds, Beverley. Thank-you

Last chance to add your names to the list I am compiling if you are unable to attend this meeting but would if you could. So far I have 320 names from across the state

Thanks Phil, I’ll have a look into it. It certainly is a shame to see what’s happened with Agritrack. Such a useful and simple tool for managing multiple machines/employees. Needs you back at the helm!!

Has anyone found an alternative to @AgriTrackAU ? Preferably one that works and has some description of backup/support for when it doesn’t? We run predominantly case gear.

@burgess_ag I’m not really sure, it’s the most confusing piece of shit GPS we have, but with those settings we don’t seem to get green strips with our boom (9036). Also have the coverage switching overlap at 99% (whatever that means) 😂

@Agro_Andy On latency isn’t really latency is it? It’s actually telling it to turn on earlier am I right? Seem to remember some backwards thing about it. Thankyou

Hardi Gurus. Running a 5500 screen with Job con to Trimble for section control. Running coverage error as high as possible but still it leaves the odd tiny triangle. Especially round trees or odd shaped headlands. Also what switch latency should I have for on/off?