Rack Robotics

907 posts

Rack Robotics

@RackRobotics

Building 🇺🇸 America’s next-generation robotic tools | wire EDM ⚡️

Colorado Springs, CO شامل ہوئے Kasım 2022

49 فالونگ6.7K فالوورز

پن کیا گیا ٹویٹ

Rack Robotics@RackRobotics·16 Eyl

The Powercore V3 is out of pre-order! All new orders should ship in 2-4 weeks. The Powercore V3 is our most capable spark generator yet. Passively cooled and extremely fault resistant to those just learning EDM or running open loop systems. Grab yours today with this link! 👇

English

155

22.3K

Rack Robotics@RackRobotics·1 Ara

@YoungMOOBY This might be an issue for noise, heat, size, etc. We looked into this when initially developing the Powercore V3

English

YoungBreezy 🖨️@YoungMOOBY·27 Kas

@RackRobotics Would it be possible to make the input 120v AC and have that convert it to 48v DC, or is that too costly/bulky?

English

113

Rack Robotics@RackRobotics·26 Kas

1/3 - Nathan asks a great question here! Why do we not supply a 48V supply with the WEDM Starter Kit? The Starter Kit is a meant to be retrofitted onto ANY motion system. We don't know what system you will use, or what its electronics will look like.

Nathan Builds Robots@NathanBuilds

I can’t believe @RackRobotics sent me this EDM spark generator without the required 48v power supply. How am I supposed to use this? 😾 Good thing I happen to 3 unused 48v power supplies laying around. This would have been a huge setback if I wasn’t a hoarder.

English

5.5K

Rack Robotics@RackRobotics·1 Ara

@JoshuaD50349171 @B32712016 We're looking into it.

English

Chippewa@JoshuaD50349171·27 Kas

@RackRobotics @B32712016 If sell this as a kit I'm buying

English

Rack Robotics@RackRobotics·27 Kas

@JoshuaD50349171 @B32712016 something similar to this. Bent and welded aluminum frame. Ballscrew actuators

English

Chippewa@JoshuaD50349171·27 Kas

@RackRobotics @B32712016 What machine would you recommend that is rigid?

English

Rack Robotics@RackRobotics·26 Kas

@OmanTheHuman1 This is a good point. We're working on more complete options with check boxes (or similar) on the site right now.

English

150

Rack Robotics@RackRobotics·26 Kas

@B32712016 We definitely recommend running a more rigid machine than a CR-10. We also recommend running LinuxCNC as it allows very good closed loop control of your system. We will soon be able to offer a controller for LinuxCNC.

English

225

B@B32712016·26 Kas

@RackRobotics Been watching you guys for a long time like a hawk. Being able to cut metal at home I think is absolutely incredible and I plan on maybe getting one to run on an older cr10 I have that can be put to use again.

English

240

Rack Robotics@RackRobotics·26 Kas

3/3 - While some future options from Rack Robotics will be turnkey machines requiring no additional electronics, our current Starter Kit is meant for people who are technically savvy and are interested in building custom setups. Is this right? What do you think?

English

1.1K

Rack Robotics@RackRobotics·26 Kas

2/3 - We have kept the system very open on purpose. Some machines may run 48V natively and will not need an additional supply that would only increase costs for the user. Some, like Nathan, will already have a 48V supply on hand. No need to charge this person more.

English

1.2K

Rack Robotics@RackRobotics·24 Kas

@qikka2888 @HoffmanTactical He wants a Betta Wire. It's almost ready for him to PAY WHAT HE OWES

English

210

qikka@qikka2888·24 Kas

@RackRobotics Send one to @HoffmanTactical

English

106

Rack Robotics@RackRobotics·24 Kas

This is getting ridiculous, first SOMEONE in the company sends one to CTRLPew and now they're sending them out to LITERAL DOGS? We are SO FIRING whoever is sending these out

ⓘ Dogs don't have thumbs@MorlockP

Need to do some unboxing photos / tweeting, right?

English

5.6K

Rack Robotics@RackRobotics·24 Kas

@LieutenantRusty @MorlockP Different materials will generally cut without fuss when running a closed loop system on LinuxCNC. Speeds and surface finish will change depending on material, but overall they are very good. Any surface grain can quickly be taken down by 2000 grit paper

English

Rusty@LieutenantRusty·24 Kas

@MorlockP @RackRobotics I *really* want to see some feedback on how it is to set up, how the surface finish goes, how it handles different materials, etc.

English

104

ⓘ Dogs don't have thumbs@MorlockP·23 Kas

Need to do some unboxing photos / tweeting, right?

English

8.2K

Rack Robotics@RackRobotics·24 Kas

@NikWestinghouse @MorlockP We're going to be getting the first Betta Wire (turnkey machines) out just before the end of the year if we keep our pace

English

Nick Westinghouse@NikWestinghouse·23 Kas

@MorlockP @RackRobotics You got one? I am still on the fence. When does the motion kit ship?

English

126

Rack Robotics@RackRobotics·20 Kas

Wow, nice Rack! Grab your Starter Kit at rack robo dot io!

Punished Cooper Simulator@CooperZurad

We cut a 1" thick rack gear on our desktop wire EDM machine! This is the most extreme cut we've ever done. This is a real deal part that you might see on an INDUSTRIAL MACHINE right on DESKTOP I'm so excited dude. This is gonna change the world. Grab yours at rack robo dot io!

English

2.4K

Rack Robotics@RackRobotics·14 Kas

@subonekd It lets you cut metal like aluminum, stainless, and hardened steel right on desktop with the same or better precision than an industrial laser for a fraction of the cost

English

263

Subonekd@subonekd·14 Kas

@RackRobotics I don’t know what that is but I see one for 700$ on your site. Might have to learn… whatever it is you said.

English

248

Rack Robotics@RackRobotics·13 Kas

Rack Robotics products will never phone home. They will never snoop what you're making. We do NOT care what you make with our products. That said, it's like, totally against the TOS to make weapon components, so just pinky promise not to please. If you do by accident, tag us!

English

121

292

5.2K

247.7K

Rack Robotics@RackRobotics·14 Kas

I mean, so far. -Cooper

English

298

10.6K

Rack Robotics@RackRobotics·13 Kas

We sell desktop wire electrical discharge machines not 3D printers, guys...

English

443

12.7K

Rack Robotics@RackRobotics·14 Kas

@Sudsy0082 @crazybirdredux We're somewhere between 1-2 thou on the Betta Wire as of now

English

720

Michael Sutherland@Sudsy0082·14 Kas

@crazybirdredux @RackRobotics EDM does VERY precise metal cutting... I'll let @RackRobotics speak to as to just how precise... But I'd not be surprised if it's tighter than .005"

English

730

Rack Robotics@RackRobotics·14 Kas

@crazybirdredux @Sudsy0082 Anything small you'd use SendCutSend or OSHCut for but want to save a few days. That and more complex, pre-hard tooling

English

131

crazybird reborn@crazybirdredux·14 Kas

@RackRobotics @Sudsy0082 I gotta figure out what I would use it for but you have my attention

English

803

Rack Robotics@RackRobotics·13 Kas

@TokuIshipekku we don't sell printers lol

English

111

1.5K

Ishpeck the Techurmudgeon@TokuIshipekku·13 Kas

I'm not saying that Rack Robotics did hack Flashforge's Twitter account to make the most brilliant marketing stunt ever. I am saying that if they did do that, it worked and I'm seriously considering buying one of their printers.

Rack Robotics@RackRobotics

English

2.7K

Rack Robotics@RackRobotics·13 Kas

@Sudsy0082 Our turnkey machine, the Betta Wire, will be about the size of a desktop 3D printer and only requires 120V single phase input

English

156

9.1K

Michael Sutherland@Sudsy0082·13 Kas

@RackRobotics Now I wish I had the space in my garage for an EDM...

English

9.6K

دریافت کریں

@YoungMOOBY @JoshuaD50349171 @B32712016 @OmanTheHuman1 @qikka2888 @HoffmanTactical @LieutenantRusty @MorlockP