Ryan Shull

@Tejanobrown We’re so back

Fuck it, we’re back

@electropro17 Yes that would be sweet. It’s all new to me so taking it one step at a time

@RyanShull1 Now you need a controller to run the pump at a preset flowrate and or hold a tank level and keep below a pressure.

Potentiometer has been installed. Very cool 😎

@justsc00bs They vary from 900’-1000’

@RyanShull1 How far down do your wells typically go? I think the ones I pulled were around 1200ft or so, which wasn't too bad getting to the pump.

Late night well pulling

@justsc00bs They tested good thankfully

@RyanShull1 Those cups look a lil worn out, lol. How bad were the balls and seats?

@RyanShull1 Pray to god above 70

Outside of a asteroid hitting us this was our top for oil and gas prices. Name a worse geopolitical scenario that could swing prices like this and we kissed..$100 Not mad but this is the top. No pipe dreams of $150 or $200. Cool….

@engalicorn Okay I’ll have to read into that thank you!

@RyanShull1 You are looking for potentiometer control. You'll want a 10kohm You will wire it into the 10V AI1, and GND. Make sure your AI1 dip switch is on V. Set remote reference to AI1.

Another VFD online. Going to order a remote dial to adjust from pump. If anyone has suggestions for a remote let me know

@BRICSinfo 👀👀

JUST IN: 🇺🇦🇷🇺 Ukraine strikes Russia's largest oil port.

@BasedFiduciary It is Calm the markets Monday’s, and bomb infrastructure Friday’s

@RyanShull1 Till later this week lol

It’s over

@Roustabout2022 100% manipulating the market

@RyanShull1 Maybe. It could be Trump manipulating the market

BREAKING: US oil prices erase gains and turn negative on the day, falling below $98/barrel. Equity markets are also paring losses.

@TFG870 I’ve been putting these on mine too. Very handy and it gives the pumper another gauge to pay attention to lol

External gauge line installs FTW. Tired of having the pumper guess 😂

@nickyboy1886 Hah I wish

@RyanShull1 Is that possible to equate to barrels of oil @RyanShull1 …, as in 1,576,800 = ?

This new VFD will eliminate 1,576,800 strokes per year. Thats a lot of wear and tear.

@Offbottom1 @nchillbilly49 Yes way easier and more precise than changing shives. I haven’t had any issues with motors yet. The unit has to be well balanced

@RyanShull1 @nchillbilly49 And a hell of a lot easier than changing shives. But it doesn’t damage the motor at higher/lower hertz? Does it make any difference if it’s 3 phase or not? Good post, never saw this before.

@nchillbilly49 It gives you the ability to adjust the hertz on the motor which adjusts the speed

@RyanShull1 How does it work?