Ryan Tilbrook

@tofar1 Could chuck some sheep in there. They will tidy them up if it doesn’t get the big ones as they be sweetned up.

##asktwitter i just had a old person moment and forgot to put my triclopyr in. Its got glyphosate, 24d, 5 grams of ally. Still work or go back over with it

@TimArthur18 Makes me think ur getting too much straw into the mills. May depend on machine and mill type but chaff is not normally green if it’s harvestable. You don’t want straw into the mills.

@RyanT027 Anything with a bit of green in it, lentils milk thistle etc, bridges the mills then fills up back to front. Even conditions of high moisture/humidity have caused it too

After unblocking the rear of my header again in first ten minutes of starting today, had me questioning how many HWS mill owners would buy another? I’m four years in and nearly had enough

@TajHasson Nah u won’t twist them. I Have shifted them a bunch. Just stay on flat ground and don’t do it on a windy day and it will be no worries at all.

@RyanT027 Well that’s made the idea a hell of a lot easier, I was worried about twisting them

Does anyone have an experience/tips on moving silos from pad to pad with a loader and some long long pallet fork extensions? Also hearing of the 12mm galv blocks for easing silos off the pad- has anyone installed any under exists silos?

@TajHasson These the blocks you talking about? Can get them off Moylan.

@HoolyMcg They prob driving past. See ya big crops and think this guys gunna have a tax problem. I’ll help him out!😂😂

Am I the only farmer that’s had a Fkn guts full of salesmen turning up unannounced? Even when told to make an appointment many times! If I want something. I’ll Fkn buy it.

@tofar1 Yes.

If my lupins are flowering will they still grow more in height? Silly question but someone said that to my brother last night.

@HoolyMcg @noncomplianz Bait. Only way.

@noncomplianz Spray or bait. I’m working that out now

Slugs …… 🧐😳🤬🤬🤬🤬🤬

@robbert115 @ColBowey

Ever wondered what PRE herbicide could be used under chicory or plantain to control weeds. Here a list of few options below that may suit (mainly for grasses). Arcade 3L is the one for plantain (and not for chicory)! Otherwise the usual propyzamide + Spinnaker. 1st photo UTC

@therealfarmagro Fitted same system this year. Doing same job as urs. But running thru Apollo not jd. Working fine. Sounds like the setting for the reg valve could be wrong. If running hypro pump only need 20-25lts of oil flow.

@agrobaz @shwittwer

If anyone’s running sense spray systems on new patriots I’d be really keen to touch base. DM me if ok 👍

@trout_86 @Ashley_Jacobs92 @S_M_Bowman @mark_mudie @GribbleRC CIC High performance ceramics in Welshpool.

@RyanT027 @Ashley_Jacobs92 @S_M_Bowman @mark_mudie @GribbleRC Who did yours?

Harvest 2024 is completed and assigned to the record books after all the rain, harvest bans and fires. Our biggest production year on a very dry spring and below average rainfall. Cereal yields were exceptional, canola and lupins above average. Quality surprisingly held up well.

@S_M_Bowman @Ashley_Jacobs92 @mark_mudie @GribbleRC I found the Dust still seemed to go black after a while of being stuck there so still required frequent cleaning.

@RyanT027 @Ashley_Jacobs92 @mark_mudie @GribbleRC We still have dust stick to muffler but the surface of the muffler, and more importantly the turbo, doesn’t get hot enough to create ignition

@trout_86 @Ashley_Jacobs92 @S_M_Bowman @mark_mudie @GribbleRC The chrome coloured coating that was used worked on the exhaust pipe. But the muffler was too big to fit in the machine they use. So it got a different ceramic coating that was black. If u could get the chrome finish on the muffler it may well work.

@Ashley_Jacobs92 @RyanT027 @S_M_Bowman @mark_mudie @GribbleRC Well that saves me wasting my time ceramic coating mine

@Ashley_Jacobs92 @S_M_Bowman @mark_mudie @GribbleRC Later models have a different design muffler. More Flow through design. Possibly help stops the hot spots? That on the 230s get. Ceramic coated ours this year but coating was still too porous and dust still sticks.

@RyanT027 @S_M_Bowman @mark_mudie @GribbleRC 8230

@Ashley_Jacobs92 @S_M_Bowman @mark_mudie @GribbleRC What model case Ashley??

@S_M_Bowman @mark_mudie @GribbleRC Yeap it was. Always started under the muffler or exhaust tip and just spread from there

@Tedthekelpie @Howelly_Agro Ah yep! I was still looking at the first photo.🤦🏻‍♂️

@RyanT027 @Howelly_Agro Canola

Working well for lupins. Next up canola 😬

@Tedthekelpie @Howelly_Agro How do you use a plane for lupins?

@Howelly_Agro First year trying. I’m 40.5 so getting a contractor not to put another set of tracks in is nigh on impossible. Plane next year if this doesn’t work

@RowAstbury @MurrayWatt They always have! Always will. But this new level of disdain by the labour government is what happens when decisions are made without checks and balances. No consequences to them for poor and outright wrong policy!

@RyanT027 @MurrayWatt The Labor Party definitely hate agriculture!

I can’t get my head around how the federal ag minister @MurrayWatt can have such a detrimental impact to the industry he is supposed to be helping! As the minister for agriculture isn’t it his job to help agriculture not hinder it! 🤷🏻‍♂️ #Notforagminister