Mark Plunkett

@tobemcgill02 Get a set of the conquest engineering ones 1-2km/hr increase in speed. Just bolt on

Trying to set up some rubber canola feeder flaps on a 640D front. Has anyone got any ideas? Thankyou in advance #askag

@tofar1 If it’s the first year and they don’t have a seed bank yet, an old bloke told us to spray with diesel. Kills the plant and soaks into woody seed

Can I use the F word

@drage_farms Needs a way to group by active, not brand name

I’ve had a lot of suggestions to build a spray chemical inventory app so here’s what I’ve made so far. Let me know what you want to see in an app like this and I’ll add it. Also help with a name because boombook sounds ridiculous 😂

@AdamCoffeyNT Mine does the same. Was told it’s supposed to increase engine revs when transmission loads up (pushing).

Does anyone have any experience with a throttle governor setup like this on an old Allison Torquematic transmission? How do they work and more importantly how do I fix it as it won’t hold constant revs under load

@agbyte_leet Would these work with Davis weather stations?

In my hand is result of 2yr journey to develop a 4G modem module to replace the 3G Telit H24 modem used in 1000's of telemetry devices since early 2000's The Adcon telemetry units I've used up until 2019 for my weather stations would otherwise be redundant in July this year when 3G network is turned off. So to avoid chucking out a functioning device @PorosityAg & I engaged a couple of Aussie businesses to build a 4/5G modem. The commands to register to the network & then send data in early 2000's compared to modern protocols are very different. We were never guaranteed that it would work, was a step by step process with lots of testing. I'm proud to say that we have an AUS made, certified, 4/5G replacement modem module which will allow continuity of data for our clients. I've just hit halfway of the 300ish sites I need to do. I guess I'm not the only person scrambling to get 3G telemetry units swapped over before the impending shutoff.

@BradMclean90 No luck sorry. The stuff I’ve got’s narrower

@markplunks 10mm think 75mm wide 3m long

Anyone know where I can get some nylon strips for a Marshall spreader today in great southern

@Ellielugsdin @sheepGeekCP @Tru_Test When using barcode scanner as input we had to program it correctly as well. Can’t remember details but can have a look later. Any ideas @Mike_RDMS

Anyone had any luck getting an XR5000 to connect to barcode printer? Input from wired EID reader on TePari Handler, need output to Zebra iMZ220. Have tried support. Trying to side sample without having two readers for weight and barcode as interferes. @sheepGeekCP @Tru_Test

@stationmum101 Have a look at submission 650. Openly submitted 4 days late yet still published

Just in case you were wondering exactly how much of a stitch up the Inquiry into the Sheep Live Export is I can tell you - a fucking massive one. Not that anyone is really surprised.

My two cents worth on Live Export #Keepthesheep

@MicGenstock @Tru_Test @BcfUltrasound Assuming different communication protocols. From memory xr5000 gives choices of oviscan, serial or legacy input. Could try each of these. Would assume that if different scanners don’t work that they have similar output settings but not familiar with their system sorry

HELP please. My older oviscan 6 connects and communications a dream with the XR5000 but my newer oviscan 6 does not. I have reached out to @Tru_Test and all I need is @BcfUltrasound to communicate with them (software issue). Unfortunately BCF are not wanting to communicate.

@CKMonty @baileyagco @BenDooley8 @sheepGeekCP @Fergenetics Generally comes down to resolution. Can settle to 0.5kg much quicker than 0.1

@baileyagco @BenDooley8 @sheepGeekCP @Fergenetics I have just been through the manual and can't see anyway todpeed it up. #manual" target="_blank" rel="nofollow noopener">manualslib.com/manual/1465483…

Spitting out 46.5s till next time 👌, @sheepGeekCP @Fergenetics check out the back gate, not game to put my head in there but doesn't hurt the arm 🤣🤣

When the guy in the paddock doesn’t have a tape measure for bolt length we improvise

@sheep_data_mgmt @ClipexAustralia Has it had pedals before? Some of the early ones could only handle certain functions

@ClipexAustralia users - how do you setup/program a new foot panel?

@Howiefarming You can charge them via the mini usb plug if you’re stuck

#AgTwitter anyone ever lost or had a broken charging cable for one of these and sourced an aftermarket charger? $200 for a genuine charging cable is a ripoff.

@AMC_DirtDollars Aeropex aftershokz bone conduction headset are awesome

#asktwitter I’ve become highly proficient at losing my AirPods… Are there any reasonable alternatives that have good call quality & don’t fall out? I can’t stomach the price anymore.

@HoolyMcg Try a hydraulic place. Might even be able to get in stainless

Anyone know where I can get 7mm ID mild steel tube from in midland ???

@nig_michael CLR works

Months in the making and hours in demolition 😂 anyone got any tips for removing the scuz off the outside of poly tanks that have been outside fire a while?

@BradMillsteed Diodes. One way valve for electricity

@farmagro1 Mount hose reel behind tyre. If chaser does need to be moved it’s not running over hose