BuildDirect (TSXV: BILD) (OTCQB: BDCTF)

Solid roundup. One “tie-breaker” we see homeowners miss in basements: moisture + comfort. Quick add-on checklist before choosing: - Do a simple moisture check (tape-down plastic overnight) + look for efflorescence - If flooding is even a remote risk, avoid carpet + lean tile/SPC/LVP - If it’s a kid/playroom, think warmth/softness underfoot (cork underlayment or area rugs) - Check ceiling height: thicker assemblies + underlay can matter fast Curious—do you ever steer people toward epoxy in utility basements?

Finished Basement Flooring: LVP vs Carpet vs Tile vs Polished Concrete rohrerforconstruction.com/finished-basem…

Stall mats *are* hard to beat on $/sqft 👌 Where rolled rubber tends to win (esp in basements) is: - way less “barn funk” off‑gassing - fewer seams/lips to catch toes or trap dust - easier to cut clean around racks/walls If it’s a garage gym + you don’t mind the smell for a week, stall mats are a great call. Basement/living space? I lean rolled. What’s your setup—garage or inside?

@homegymcoop Idk man. I considered it for my gym but find stall mats to be superior

Rolled rubber gym flooring > everything else I’ve used every type of gym floor; NOTHING compares to seamless rolls. This is going in my new basement gym and I’m as giddy as a kid on Christmas.

Totally fair 😅 If you want “real but polished,” here’s a non‑AI edit stack that works well for listings: 1) straighten verticals (keep walls true) 2) white balance so whites aren’t yellow/blue 3) lift shadows a touch + pull highlights back 4) mild clarity/sharpen (don’t overdo) 5) crop for composition (lead w/ the entry + natural light) Curious—are you shooting phone HDR or a wide‑angle lens? That changes how far you can push highlights without it looking crunchy.

@builddirect Tired of ai

1, 2, or 3 for first listing photo?

Yep—warm, natural tones are having a real moment again. Staging trick we’ve seen work: stay in that “classic oak” middle ground (not too dark, not too blonde) + keep the variation subtle so photos don’t look busy. Curious from your staging side: which rooms make buyers *most* willing to choose LVP over real wood (kitchen? basement? rentals)?

Luxury vinyl or hardwood? One 2026 flooring trend we’re seeing: warmer, natural wood tones (yes, even in LVP) are replacing cool grays. If you’re weighing vinyl vs hardwood, this blog breaks down durability, resale value, and where each works best: 🔗 homestagingbylisa.com/flooring-luxur…

Basement gym = perfect use case. Two small “wish I knew” tips: 1) Check slab moisture (simple plastic-sheet test) + use a vapor barrier if needed. 2) Let the rolls relax/acclimate flat before trimming seams — they tighten up. Your lungs will thank you for skipping stall-mat funk 😄

@texasrunnerDFW The *color* is the crime 😅 If you want LVP that won’t date itself fast: go warmer (oak / greige w/ beige undertone), keep the pattern low-contrast, and choose a matte finish. Bonus: 20 mil wear layer + rigid core + good underlayment > “trendy” tone every time.

Multi-tone grey vinyl plank flooring is the millennial generation’s popcorn ceilings

Hot take: the best remodels start with a tape measure, not a Pinterest board. Measure twice, order once, and plan for waste + transitions. Your future self will thank you. #HomeRenovation #Flooring #DIY #DesignTips

Yep—if it’s *higher to lower* right at the doorway, a transition can be the cleanest fix. Quick rule of thumb: • **T‑mold** = best when both floors are basically the **same height** (covers the expansion gap). • **Reducer** = better when you’re stepping **down** into the next room. If the joint is opening because the plank is flexing over that “hump,” it’s worth checking the subfloor flatness right there (even 1–2mm can matter with click joints). Do you know roughly how big the height change is (like 1/8" vs 1/4"+)?

@builddirect @Watchman_motto Thanks for the info! No squeaks but we do have one area where the boards are coming out of joint in a doorway. So not sure what I’m going to do about that. Definitely going to take the time to make everything level in about 20 years 😂

Hard rule. Always use natural materials. Wood, stone, brick, tile, etc. if that means you suffer through a couple years with a floor you hate before you can afford to use real hardwood, good. Don’t let me catch any of you putting click-clack floors in your homes. It’s never worth saving $.

Fair 😅. A little cleanup (exposure/white balance, straighten verticals, declutter) helps, but once you’re swapping skies/warping lines it starts feeling fake fast. If you want “real but polished,” shoot in soft daylight + keep edits to: 1) correct color cast, 2) lift shadows, 3) minor crop/level. Which one felt the most AI-ish to you—sky, saturation, or the lines?

Travertine tip: honed finishes hide etching better than polished, but still need sealing. Pearl tones = warm + forgiving in busy kitchens. Ask your installer about slip rating for wet areas. #Stone #Travertine #KitchenDesign #Renovation

@OGTaylorB @CarolWalshReal1 “Waterproof” laminates have gotten way better, but standing water + seams are still the long-term risk. What’s your subfloor (slab vs plywood) and do you want it to feel softer/warmer underfoot?

@CarolWalshReal1 Do you have any opinions about LVP flooring vs water safe laminate flooring? We're redoing our living room and want something nice and durable because we have busy kids and a dog.

I declare this thread good wood

@gonewaytoufar @MaryTilesTexas What’s the current floor and are there any cracked/loose areas?

@MaryTilesTexas question: If I want to put new floors in, should I have the contractor float over the existing flooring and put new floor down (all ceramic tile) or rip up old floor?

Engineered hardwood isn’t “fake wood”—it’s real wood built to stay stable when life gets messy (kids, dogs, humidity). Better planks, fewer gaps, more peace. #Flooring #Hardwood #HomeRenovation #DIY

Because the commute savings spreadsheet doesn’t include: 1) ladder + ice, 2) somebody clipping your car at 70mph, and 3) your insurance agent having an out‑of‑body experience 😅 If he’s committed: better lighting + a proper anchored stair/rail setup would be the “don’t die for 8 minutes” upgrade.

This is a genius life hack Friend bought a house right by the highway Parks his car on the side of the highway In the morning, he just climbs this ladder and hops in his car He’s already on the highway and can head right to work Cuts 8 minutes off his commute Why aren’t more people doing this?

100% on getting 3 quotes. One more “cheap vs expensive” sanity check I like for tree work: • Proof of liability + workers comp • What’s included (haul-off, stump grind, cleanup) • How they’re protecting fences/pool/neighbor yard + access plan Sometimes the cheapest bid is the best… but only if it’s *complete*.

Getting this big ole tree taken out of my backyard. Got 3 quotes Quote 1 - 5k Quote 2 - $3900 Quote 3 - $1900 Always get 3 quotes. Quote 3 is looking pretty good 👌

Laminate tip: look for an AC4 wear rating if you’ve got kids/pets + real foot traffic. It’s built for daily life—and still looks sharp. 10mm thickness adds a quieter, sturdier feel underfoot. #Flooring #Laminate #HomeRenovation #DIY

Yep — engineered gets underrated. Most buyers don’t “clock” engineered vs solid; they notice *spec + install*. A few high-end tells that actually matter: • wear layer thickness (can it be refinished?) • plank width/length + bevel/profile • flat subfloor + proper acclimation (this is where “cheap” shows up) If you want that premium look, a thicker wear layer + matte finish goes a long way. Is this for a flip, or a forever-home (kids/pets/water risk)?

@rohindhar Do you mean LVP? For 99% of buyers, even in the luxury segment, won't be able to tell engineered hardwood is not "full hardwood" (it is real hardwood, on top of layers) Lots of high end architects prefer engineered hardwood simply because it won't warp like full wood.

If you’re doing a high end house flip I don’t think you can use engineered hardwood floors anymore Gotta go with the real thing

Totally get the “5 million options” overwhelm 😅 FWIW, wet/dry vac-mops can be clutch for mud + dogs on LVP, but a few pro tips: 1) quick vacuum/sweep first (grit + roller = micro-scratches) 2) go easy on soap (too much = streaky + sticky) 3) empty/rinse the dirty tank + roller same day — self-clean helps, but it’s not magic. Is your LVP mostly smooth, or does it have a deeper texture/embossing?

TradWife Question: do you own one of those wet dry vacuum mop things? Does it actually work? Is the self-clean legit? Context: 2-4 months of mud season annually, I live on a farm w ppl & dogs tracking stuff into the house constantly, LVP flooring, steam mop is dying rip.

Design trick: wide-plank + light oak = instant “bigger room” vibes. Pair it with simple white baseboards and watch the space breathe. #flooring #laminate #homerenovation #interiordesign