Extrutim 🔥

I got one too! That's so cool! 🤩🥳 Thanks so much to the @Prusa3D / @printablescom team and everyone who downloaded any of my stuff! 🙏

@JoshMurrah @WillowCreativ There are two different boxes, but they're basically the same. However, the one with three grooves can also accommodate slightly wider spools. In any case, the printed parts of my Drybox design fit in both versions. printables.com/model/1523656

@WillowCreativ Actually- looking at the photo again, it’s missing the grip rib things - mine all have some ripples in the sides to grab with - so they ARE different.

4.49 storage containers for filament at hobby lobby. Has an additional mini lid to open for direct filament feeding too

I wish you all the best in your future ventures! Over nearly 10 years in the 3D printing community, there haven’t been many constants, but Pooch was and still is one of them. It feels like you’re everywhere. Everyone knows Pooch, everyone likes Pooch, Pooch is cool, and I’m glad I got to meet you in person at Formnext!

‼️PRUSA x INDX for CORE One is here! With this release, desktop 3D printing enters its endgame: ✅ 8 independent tools. 8 loaded materials. Different nozzle sizes ready at all times ✅ Abrasion-resistant nozzle (INDX) ✅ True high flow with CHT, fast printing with your!! validated materials (INDX) ✅ Low-latency temperature control with induction heating and low-mass nozzle. Fast heat-up and fast cool-down (INDX) ✅ Dynamic dual-drive gear with large diameter. The grip strength self-adjusts based on the loaded material on pickup (INDX) ✅ Accelerometer ✅ Class-leading loadcell mesh calibration ✅ Fast eddy current toolhead offset calibration with ambient noise cancellation (PRUSA) ✅ Priming outside print area, with real print backpressure analog. Only 13 milligrams of material to fully prime. 1/5th of previous best in class!!! (PRUSA) ✅ Waste/priming pellets are formed for direct recycling. No grinding or pre-processing needed before going in the filament extruder (PRUSA) ✅ No waste/prime tower as the tool is pre-primed fully (PRUSA) ✅ True Toolchange Time: 10-17 seconds per change based on material. That’s from the last extrusion from one material to the first extrusion with the next, on the model itself. Achieved with removing the waste tower (PRUSA) ✅ Enclosed heated chamber and automatic vent opening for low-temp materials What a time to be alive, when you can have this at home / office / lab! I would not believe it 5 years ago! Big shoutout to @BondtechAB for INDX and my team for the rest of the innovations needed to make this awesome package ❤️ Now I guess we can just go hotter and bigger 😎 More info ⤵️

Well that's new @Voron_Design

I have designed a Foldable Wooden Crate for the Jeep Kit Card! Willys Jeeps were partially dissasembled and packed into wooden crates for efficient shipping. The STL is available for free from MakerWorld It was 3d printed on the @BambulabGlobal A1 Mini using @Fiberlogy_3D PLA

Happy I can finally share this ..been running indx on my v2 350 for a while now ..made a new gantry for it so I can mount all the indx tools on the rear instead of the front...with a nice RGB cover to hide the rear of the toolhead..it turned out really nice so far

New Video: 3D Printing Design Guide ⚙️ Stop guessing and start engineering. Master tolerances, part strength, and support-free geometries to take your prints to the next level. feat. @ChrisH_elmke Watch it here: youtu.be/394ciQHL5ng

NEW VIDEO: The Ultimate Guide to Chemically Smoothing 3D Prints! 🧪✨ youtu.be/cQ_y18UjNr4

Have you tried applying some grease to the Z spindles? You're not supposed to do that because the nuts are self-lubricating, but I also had the problem at first that the Z axis was never properly leveled, which resulted in scratches on the print bed. Since greasing the Z spindles, everything has been running smoothly.

I agree. That plate was freshly cleaned with Dawn and warm water before I tried that. And did you notice the nice gouge the printer put into the plate surface (from when it was printing the first Magneto helmet)? That's TWO different build plates it has ruined; this @SliceWorx3D one, and my @WhamBamSystems PEX plate.😢

First layer test on the @Prusa3D #XL5T not looking too good.😢 Given all the issues I’ve had, and how the techs at @PrintedSolid didn’t find anything wrong, I’m seriously starting to think I’m too f’ing stupid to own this printer.

Checking out the @snapmaker U1 speed potential 🚀 Some firmware and slicer tweaks in the testing. Basis: github.com/JNP-1/Snapmake…

@tommy_prusa3d @Mauker Will the Core One L also be added in the future?

@Mauker We had to remove a few due to some issues with current vouchers and products (yay new year). We should be putting it back during the coming week

Hm, interesting. I can't see the Prusa Mini, the MK4S nor the printer discount rewards on printables anymore. I wonder whether they're cooking some changes there. 🤔

This is a shame, so much talent to leave the platform. We need to give our reviewers more respect before we lose all the good ones. Especially someone as standup as Michael. youtu.be/rr8woTpD-uk?si…

Hey, check out my new video! 🚨 It was about time... youtu.be/znQ91rAphP0 There are so many dry boxes out there, but I couldn't find one that did everything I wanted, so I made my own that is cheap and has everything I need! #3dprinting #3dprinted #3dprinter

That would be very interesting! I always enjoyed watching the livestreams, and it was a whole different level of connecting with the community. It would be great to see regular streams again in some form that involve the community and perhaps offer a little bts insight into what is being worked on, e.g., the slicer or printables!

@MattStultz @themitch22 I'm strongly thinking of starting a much less formal one with occasional visits from the more known faces, with a bigger focus on guests. Think that would be something interesting?

It's funny the things you find when you clean your basement.

This feels like the license many of us have been waiting for! 🥳 Finally a realistic balance between sharing work openly and protecting creators from pure exploitation. Big step forward for the community!

Printables Wrapped, that's cool! So 45 badges = level 45, do I have the high score? :D Or is there someone else? 😅 @TheZuza @printablescom

@TheZuza @printablescom Nice! Just checked mine and this screen shows the number of published models instead of downloads. Is it a bit different for everyone? I'd be interested to know the download numbers, so I guess I'll have to check the analytics. :)

My @printablescom wrapped! Check yours at: printables.com/wrapped

New Video Released: Bambu P2S vs QIDI Q2 vs Creality K2 vs Centauri Carbon The BIG Mid-Range COMPARISON! Watch here: youtu.be/ezaI7mlomek

@SonoranDefense Thanks! Not at all. I'm pretty satisfied and already have plans for more in this direction.

@Extrutim man that is so sic! i wonder how rickety it is, if at all.

Nominations for the Printables Award 2025 are still open! I haven't uploaded that much this year, but maybe one or two of you would still like to vote for my 3D-printed cabinet that I built in May! 😉 printables.com/model/1287889 Thank you very much! 😁 #3dprinting #3dprinted